Field NotesClassroomNo. 13
How to build a plant science lesson plan around real data
NGSS asks middle schoolers to explain growth with evidence, including their own experiments. Here is how to turn one good question into a three-week unit with a fair test, a daily data sheet and a written explanation.

The short answer Build the unit around one testable question, such as how light or fertilizer changes seedling growth, and tie it to NGSS MS-LS1-5 (HS-LS1-3 or HS-LS1-5 in high school). Run a fair test with several pots per condition, measure on a fixed schedule into one shared data sheet, then have students graph the results and write a claim, evidence and reasoning explanation. Fast Plants fit the calendar: seedlings emerge in about two days and, in ideal conditions, flower in about two weeks.
The plants set the pace, so plan the calendar, fair test and data sheet first. You’ll need seeds, potting mix, pots on a wicking system, fertilizer pellets, a light fixture, a ruler, a kitchen scale, a thermometer and a hygrometer.
Start with a question students can test
Open with a phenomenon, such as two trays of the same seedlings that look different after a week, one under a lamp and one on a windowsill. Even one tray works: the Wisconsin Fast Plants program notes that its plants “naturally vary in size and shape,” and that height differences “can be caused by genetics and/or environmental factors.”
Students list causes, then narrow to one question. NGSS Appendix F asks middle schoolers to “ask questions that can be investigated within the scope of the classroom,” and high schoolers to “evaluate a question to determine if it is testable and relevant.” Good questions change one condition:
- How does distance from the lamp affect seedling growth?
- Does fertilizer change how many leaves a plant grows?
- Do plants kept wetter grow differently from plants kept drier?
Align the unit to NGSS
- MS-LS1-5: “Construct a scientific explanation based on evidence for how environmental and genetic factors influence the growth of organisms.” Its clarification gives “drought decreasing plant growth, fertilizer increasing plant growth” as example evidence, making it the closest fit.
- MS-LS1-6: “Construct a scientific explanation based on evidence for the role of photosynthesis in the cycling of matter and flow of energy into and out of organisms.” Pair it with a light question.
- HS-LS1-3: “Plan and conduct an investigation to provide evidence that feedback mechanisms maintain homeostasis.” Its examples include “root development in response to water levels,” so it suits a watering question framed around feedback.
- HS-LS1-5: “Use a model to illustrate how photosynthesis transforms light energy into stored chemical energy.” A light test supplies evidence for the model.
The explanation practice for MS-LS1-5 and MS-LS1-6 calls for evidence “(including the students’ own experiments).”
Design a fair test
For grades 6 to 8, Appendix F says the design should identify “independent and dependent variables and controls,” the tools, “how measurements will be recorded, and how many data are needed to support a claim.” Before planting, have each group write down:
- Independent variable: the one condition you change, such as fertilizer or none.
- Dependent variables: height, number of true leaves, date of the first open flower.
- Controlled variables: seed packet, potting mix, pot size, planting depth, seeds per pot, light, watering.
- Control group: plants grown the standard way.
- Replicates: several pots per condition; Appendix F names “multiple trials” as a way to improve precision.
For a light test, set some seedling tops at the recommended distance and others farther away, measuring light at plant level for each. The Fast Plants program says windowsill light is insufficient and gives spindly stems, small leaves and little or no flowering, so count leaves and flowers as well as height. In other tests, alternate treatment pots under the lamp so no condition gets the best spot. High schoolers should “consider possible confounding variables” (Appendix F).
Plan the measurements
Measure at the same time of day, with the same tool, the same way. Appendix F asks middle schoolers to “evaluate the accuracy of various methods for collecting data,” so have everyone measure one seedling and compare.
| What (unit) | Low-tech way | Sensor option | How often |
|---|---|---|---|
| Height (mm) | Ruler, soil surface to top of the growing tip | None needed | Each school day |
| True leaves, first flower (count, date) | Count by eye | None needed | Each school day |
| Soil moisture (g, or % water by volume) | Weigh the pot on a kitchen scale | Soil moisture probe | Each school day |
| Light at plant level (lux, or µmol/m²/s) | Phone light-meter app | Lux or PAR meter | At setup and after any change |
| Temperature (°F or °C) and humidity (% RH) | Thermometer and hygrometer | Logging sensor | Each school day; a logger covers weekends |
Log soil moisture even when it isn’t your variable. What is volumetric water content explains probe readings, how much light do houseplants need covers where to hold a light meter, and classroom plant experiments with sensors has sensor setups.
Keep one shared sheet with a row per pot per day: day after planting, date, pot ID, condition, height, true leaves, pot weight and notes. Label pots by group number, not student name.
Plant timing, light and logistics
Fast Plants, a rapid-cycling variety of Brassica rapa developed at the University of Wisconsin-Madison, were bred for a short flowering time of 14 days. Seedlings planted on a Monday begin to emerge Wednesday, and nearly all have germinated by Friday. In ideal conditions, flowering begins at two weeks and lasts a week or more.
The FAQ’s growing conditions:
- Light: intense and continuous, 24 hours a day, from cool white fluorescent or full spectrum LED lights about 3 to 10 cm (roughly 1 to 4 inches) from seedling tops for the first two weeks.
- Temperature: about 70 °F is ideal. A cooler room slows growth; a warmer one speeds it but may make plants weak or spindly.
- Water: never let seeds or plants dry out. Use a wicking system, check it daily and top off reservoirs “especially before weekends.” Schedule around long breaks.
- Fertilizer: slow-release pellets go in the bottom third to half of the mix. Use any fertilizer at label rates.
Before day 1, check allergies (soil, plants, pollen, latex) with your school nurse. Offer non-latex gloves and have everyone wash hands after handling soil or fertilizer. Let students with pollen allergies skip handling flowers. Keep cords and power strips away from water; clear 24-hour lighting with your school.
A sample three-week outline
The BSCS 5E Instructional Model has five phases. Engagement draws out prior knowledge and sparks curiosity; exploration gives students “a common base of activities”; explanation focuses attention on part of that experience; elaboration extends understanding; evaluation lets students assess themselves and teachers check progress. Daily measuring (a few minutes) runs under every phase.
Week 1
- Day 1, engage: show the phenomenon; students list causes and draft questions.
- Day 2, explore: groups choose a question, write variables, controls and pot count, set up sheets.
- Day 3, explore: plant, label, set up lights and wicks; record baseline light, temperature and humidity.
- Day 4, explore: practice measuring the phenomenon seedlings; agree where the ruler sits and what counts as a true leaf.
- Day 5: count emerging seedlings, take first pot weights, top off reservoirs.
Week 2
- Days 6 to 10, explore: daily measurements.
- Day 7 or 8, explain: what plants need and, for MS-LS1-6 or HS-LS1-5, how photosynthesis uses light.
- Day 10: groups graph data so far and check the test is still fair.
Week 3
- Days 11 and 12, elaborate: pool class data; calculate means, medians and growth rates; high school groups fit lines.
- Day 13: two weeks after planting; record first-flower dates.
- Days 14 and 15, evaluate: final measurements, written explanations, peer critique.
Analyze and graph the data
Appendix F asks grades 6 to 8 to “apply concepts of statistics and probability (including mean, median, mode, and variability)” and to use graphs “to identify linear and nonlinear relationships.”
- For each condition and day, find the mean and median height of the replicates, and the range (largest minus smallest) to show variability. Example, made-up numbers: 40, 44, 47 and 53 mm give a mean of 46 mm (184 ÷ 4), a median of 45.5 mm and a range of 13 mm.
- Graph mean height (mm) against day after planting, one line per condition.
Growth rate between two measurements:
growth rate = (h₂ − h₁) ÷ (d₂ − d₁)
where h₁ and h₂ are heights in mm on the earlier and later day, and d₁ and d₂ are those days after planting. Example, made-up numbers: a plant 12 mm tall on day 5 and 47 mm on day 12 grew (47 − 12) ÷ (12 − 5) = 35 ÷ 7 = 5 mm per day.
Grades 9 to 12 add “slope, intercept, and correlation coefficient for linear fits.” Fit a line only where the points fall close to one, and say so if they curve.
Students should also “distinguish between causal and correlational relationships in data” (the fair test supports a causal claim; the temperature log alone shows only patterns) and weigh “limitations of data analysis (e.g., measurement error)” using the day 4 results.
Assess with claim, evidence and reasoning
In Katherine McNeill and colleagues’ framework, a claim is “an assertion or conclusion that answers the original question,” evidence is “scientific data that supports the claim” and reasoning is “a justification that links the claim and evidence,” using appropriate scientific principles. A fourth part, the rebuttal, “recognizes and describes alternative explanations.” Give students a frame:
- Claim: one sentence that answers the driving question.
- Evidence: specific numbers from the class data: means, ranges, first-flower days, pot counts.
- Reasoning: why those numbers support the claim, using what the class learned about plant needs or photosynthesis.
- Rebuttal: another explanation (one tray sat warmer) and whether the logs rule it out.
Score each part separately, so a shaky claim doesn’t erase strong evidence. Then save the class data: Appendix F asks high schoolers to compare data sets “(e.g., self-generated, archival),” and this year’s numbers make next year’s archive.
Sources
- MS-LS1 From Molecules to Organisms: Structures and ProcessesNext Generation Science Standards
- HS-LS1 From Molecules to Organisms: Structures and ProcessesNext Generation Science Standards
- APPENDIX F – Science and Engineering Practices in the NGSSNext Generation Science Standards (April 2013 release)
- The BSCS 5E Instructional Model: Origins, Effectiveness, and ApplicationsBSCS Science Learning (Bybee, Taylor, Gardner, Van Scotter, Carlson Powell, Westbrook and Landes)
- Frequently Asked Questions - Wisconsin Fast Plants®Wisconsin Fast Plants Program, University of Wisconsin-Madison
- Supporting Grade 5-8 Students in Writing Scientific ExplanationsKatherine L. McNeill, Boston College (NSF grant DRL-0836099), hosted by CADRE
General information, not professional advice for a specific plant or crop. Spot something wrong? Email info@terrathink.io.


