Field NotesClassroomNo. 15

Six classroom plant experiments with sensors that produce real data

Each one runs for days or weeks and gives students numbers worth graphing. All six work with a ruler, a kitchen scale and a thermometer, and sensors slot in where you have them.

Two high school students examine test tubes of plant samples at a classroom lab bench

The short answer Six investigations work well for grades 6 to 12: light and growth, how fast potting mix dries, transpiration, salt and germination, temperature and germination speed, and leaf vs. air temperature. Each changes one variable and measures the result on a schedule, with a sensor or a ruler, kitchen scale and thermometer. Use at least three replicates per treatment.

A plant is always reporting on its light, water and air. These investigations give students a schedule for writing it down. For NGSS alignment and assessment, see how to build a plant science lesson plan.

Set up one data table and real replicates

One layout, one measurement per row, lets every team share a sheet.

Date and time Day Treatment Replicate Measurement Value Unit Instrument Notes
Mar 2, 9:10 0 2 screen layers B Height 38 mm Ruler Team 3
Mar 2, 9:12 0 2 screen layers B Light 4,200 lux Phone app Team 3
Mar 2, 9:15 0 Bare pot A Pot mass 612 g Kitchen scale Team 5

The values are invented to show the format.

  • Replicates: at least three pots or bags per treatment (A, B, C), five if space allows. Seeds in one bag share conditions, so the bag is the replicate, not each seed.
  • One change: keep pots, mix, seed packet and watering identical, and shuffle positions so no treatment always gets the cart’s warm end.
  • Consistency: same time of day, same instrument, unit every time. Record team numbers, not names.
  • Allergies: moisten mix to keep dust down, offer nitrile rather than latex gloves, give students with soil or mold allergies the instruments, and have everyone wash hands after handling mix or seed.

Light and plant growth

  • Question: How does the amount of light change seedling growth?
  • Change: Distance from one grow light, or 0 to 3 layers of window screen. Keep day length equal with a timer (University of Missouri Extension suggests 16 to 18 hours for plants with no outdoor light).
  • Measure: Sensor: light at leaf height per treatment, day 0 and weekly. A quantum (PAR) sensor reads PPFD (photosynthetic light, 400 to 700 nm). Virginia Tech advises against lux for plants because it describes light as people see it, but a lux meter or phone app can rank treatments under one lamp. The PPFD, lux and DLI calculator converts readings for your light source to PPFD and DLI, the day’s photosynthetic light total. Low-tech: every two or three days, record height, leaf count and the stem length between the lowest two leaves.
  • Materials and time: Untreated radish or bean seed, 12 identical pots, mix, a grow light, a timer, a ruler. 30 minutes to set up, 10 per check, two to four weeks.
  • What to expect: Missouri’s signs of too little light are long internodes (stretched stem between leaves), smaller-than-normal leaves, pale green stems and foliage, and yellow lower leaves that drop. So the tallest seedling may be the most light-starved.
  • Watch out for: Lamps can warm nearby pots, so log temperature at each treatment. Keep cords and power strips dry.

How fast potting mix dries

  • Question: How fast does a pot lose water after watering, and how much leaves through the plant?
  • Change: A planted pot vs. an identical pot of mix with no plant. Second round: potting mix vs. a sand-heavy mix.
  • Measure: Water until it drains, wait 30 minutes and weigh (day 0), then weigh at the same time each school day. Sensor: a soil moisture probe per pot at one depth, logging every 30 to 60 minutes. Graph raw numbers if that’s what it gives; the shape matters, and mass is the check.
  • Materials and time: Six identical pots with saucers, one bag of mix, three similar small plants, a kitchen scale reading to 1 g. 20 minutes to set up, 5 a day, one to two weeks.
  • What to expect: The U.S. Geological Survey (USGS) defines evapotranspiration as evaporation plus transpiration. The bare pot loses water only by evaporation, so the gap between the two mass curves roughly estimates what the plants transpired. USGS also notes that sand particles release water readily.
  • Watch out for: Start on a Monday so the fastest drying lands on school days. If plants wilt, water them and stop.

Transpiration and the air around the leaf

  • Question: Do warmth, humidity and moving air change how fast a plant loses water?
  • Change: One factor per run: a fan on low vs. still air, warm vs. cool, or a clear tote with a dish of water inside (humid) vs. open air.
  • Measure: Open with NASA JPL’s demo, on an outdoor plant, ideally in sun: a clear bag tied around a group of leaves, a control bag around a pencil, checked after 30 minutes. For numbers, bag each watered pot and its soil surface, tied at the stem, so water leaves only through the leaves, and weigh each class. Sensor: log temperature and humidity at the plants and enter each pair in the VPD calculator (what is VPD explains it).
  • Materials and time: Six similar potted plants, bags, twist ties, a scale (0.1 g is ideal), a small fan, a thermometer-hygrometer. Demo 30 to 60 minutes; weighing one to three days per condition.
  • What to expect: JPL expects a lot of condensation in the leaf bag and little or none in the pencil bag. USGS says transpiration rises with temperature and air movement and falls as humidity rises; moving air swaps the moist air at the leaf for drier air. A succulent, which USGS says transpires less, makes a good comparison.
  • Watch out for: Keep the fan and its cord away from water and walkways. Water before sealing, since USGS notes plants short of soil water transpire less.

Salt and seed germination

  • Question: How does salty water change how many seeds sprout, and how fast?
  • Change: Table salt in distilled water. With an EC meter, add salt until each solution reads a target (say 0, 1, 2, 4 and 8 mS/cm); without one, mix by mass (say 0, 1, 2, 4 and 8 g per liter, which won’t match those EC numbers). The EC to ppm converter handles ppm readings.
  • Measure: Put 20 seeds on a paper towel in a zip-top bag and wet it with one solution. Agree on what counts as germinated (a visible root tip, say) and count once or twice a day for seven days.
  • Materials and time: Untreated radish seed (lettuce for comparison), paper towels, bags, labels, salt, distilled water, a scale or measuring spoons. 40 minutes to set up, about a week.
  • What to expect: Iowa State University Extension says high soluble salts harm plants by reducing water uptake, with seeds and seedlings most vulnerable. It lists radish as highly sensitive (damage above 2 mmhos/cm, the same unit as mS/cm) and lettuce as moderately tolerant (above 4). Expect slower or fewer sprouts at the salty end, and test whether radish reacts at a lower salt level than lettuce. The categories describe soil, so treat them as rough benchmarks.
  • Watch out for: Label solutions, no tasting, and pour leftovers down the sink with running water, not onto garden beds.

Temperature and germination speed

  • Question: How does temperature change how fast seeds sprout?
  • Change: Location: a refrigerator, a cool room, the classroom, and a seedling heat mat with a thermostat. Keep every bag in the dark (inside a closed box) so temperature is the only difference.
  • Measure: Sensor: a temperature logger in each spot, recording every 30 minutes. Low-tech: a min/max thermometer read and reset daily. Set seeds up as in the salt investigation with plain water, count daily, and calculate percent germinated and average days to germination.
  • Materials and time: Untreated lettuce and radish seed, paper towels, bags, labels, thermometers, a heat mat. 30 minutes to set up, one to two weeks.
  • What to expect: In J. F. Harrington’s data, published by Oregon State University Extension, lettuce seedlings appeared in 15 days at 41°F, 7 at 50°F, 4 at 59°F, 3 at 68°F and 2 at 77°F, with little or no germination at 95°F. Radish took 29, 11, 6, 4 and 3 days at the same five temperatures. Those seeds were planted half an inch deep in soil, so compare the pattern, not the exact days.
  • Watch out for: Supervised heat only: a thermostat-controlled mat with its plug kept dry, never a hot plate. Seal and label refrigerator bags and keep them away from food.

Leaf temperature as a transpiration signal

  • Question: Do a thirsty plant’s leaves run warmer than a well-watered plant’s?
  • Change: Water half the plants normally and stop watering the rest until they start to wilt.
  • Measure: Sensor: an infrared thermometer on the same three leaves per plant, close enough that its spot lands on the leaf, plus a shaded air thermometer at leaf height. Record leaf minus air daily at the same time. Low-tech: weigh the pots daily, as in the drying investigation.
  • Materials and time: Six identical potted plants (beans work well), an infrared thermometer, a thermometer, a kitchen scale. 10 minutes a day for one to two weeks.
  • What to expect: JPL explains that plants regulate their temperature by releasing water through stomata; short of water, the stomata close and the plant warms. In JPL’s infrared photos of two houseplants, the water-stressed one was clear by day 5. Expect the dry plants’ leaf-minus-air gap to climb relative to the watered ones, and their daily mass loss to shrink. Don’t promise leaves will read below air; compare plants with each other. How to measure plant water stress shows how researchers turn this into a stress index.
  • Watch out for: Keep any laser pointer away from eyes, and water the dry plants when the run ends.

Graphing and reading the results

  • Over time (height, mass, moisture, leaf minus air): time on the x-axis, one line per treatment mean, each replicate as faint dots.
  • Germination: cumulative percent germinated by day. The rise shows speed; the plateau, the final percentage.
  • Salt dose: add a graph of EC (or grams per liter) against final percent germination.
  • Before claiming a difference, compare the gap between means with the spread within treatments. Heavy overlap means “no clear difference yet.”
  • Label axes with units and name the instrument, so “moisture” can’t mean both grams and sensor counts.

Sources

  1. Soil temperature conditions for vegetable seed germinationOregon State University Extension Service (data from J. F. Harrington, UC Davis)
  2. Salt Tolerance of Selected Garden PlantsIowa State University Extension and Outreach (Yard and Garden)
  3. Evapotranspiration and the Water CycleU.S. Geological Survey, Water Science School
  4. Transpiration DemoNASA Jet Propulsion Laboratory, JPL Education
  5. Lighting Indoor Houseplants (G6515)University of Missouri Extension
  6. Calculating and Using Daily Light Integral (DLI): An Introductory GuideVirginia Cooperative Extension (Virginia Tech)

General information, not professional advice for a specific plant or crop. Spot something wrong? Email info@terrathink.io.

Keep reading

All field notes

Join the waitlist

New field notes by email, and first word when the hardware goes live.

By joining, you agree to get email updates from Terrathink. Unsubscribe anytime. Privacy policy